Products // Switches and Jacks // 26-62. SMT-Push-Button-Switch

  • single- or two-pole design
  • 20000 switching cycles
  • detent mechanism possible
  • 8kV ESD protection
  • two switch styles (break before make and make before break)
  • two operation functions ( impulse and independent release)

SMT-push-button switch to be used as an alternative to THT-switch 26-12 without changing the front-panel layout. The mechanical fixation on the PCB is realized by two solderable fixing-plates. For additional fixation, the switch can have two plastic-fixation-pegs. Special versions on request.

Mechanical Data

Fixation mode SMT
Number of poles max. 2 pole
Coplanarity of the solder pins ≤ 0.1mm
Mech. lifetime 20 000 operations
Electrical lifetime min. 10 000 actuations
Operating function detent pos/impulse pos.
Switching mode break before make/short
Operating force approx. 4N
Stop force 15N
Vibration >20g
Shock test >50g
Climate HPF DIN 40040
Resistance against cleaning fluids yes
Operating temperature -25...+85°C

Electrical Data

Switching voltage 60~/75-V
Contact load, dynamic 0,5A
Standby current (20°C) max. 1A
Contact rating max. 10VA
Test voltage 500V 50Hz
Contact resistance initial < 50mΩ
Insulation resistance > 100 000MΩ
Insulations class VDE 0110 Gr. C
Critical capacity < 2pF
ESD protection 8kV

Other Data

Soldering heat-proof IR acc. CECC 00802, class C
Soldering DIN IEC 68T2-20
Soldering Tape and reel, 350 pcs. per reel