Products // Switches and Jacks // 26-11. Toggle switch

  • Single pole design
  • 7 detent and two push button combinations
  • Max. 3 positions
  • Two toggle colours (blue and black) available
  • 20.000 switching cycles
  • Watertight design available

For the mechanical fixation of the switch to the PCB, there is, apart from the tongue and groove system, room for an additional plastic- or metal-fixation-peg, which can be soldered. The toggle-switch is a front-panel-component acc. DIN 41494 for 19'' racks in industrial electronics. This toggle switch is also available in SMT-design with virtually identical dimensions.

Mechanical Data

Fixation mode THT 
Pitch of solderpins 2.54 mm
Number of poles 1 or 2 pole 
Number of switching positions 3 max. 
Mech. lifetime 20.000 operations 
Electrical lifetime min. 10.000 actuations 
Operating function detent pos / impulse pos. 
Switching mode break before make 
Operatiing torque 1.5 - 3.0 Ncm
Stop strength 15.0 Ncm
Vibration > 20.0 g 
Shock test > 50.0 g 
Resistance against cleaning fluids yes 
Operating temperature -25 °C ... +85 °C

Electrical Data

Switching voltage 60~/75- V
Contact load, dynamic 0.5 A
Standby current (20 °C) max. 2.0 A
Contact rating max. 10 VA
Test voltage 500.0 V 50Hz 
Contact resistance initial < 50.0 mΩ
Insulation resistance >10.000 MΩ
Insulations class VDE 0110 Gr. C 
Critical capacity < 2.0 pF
ESD protection 8.0 kV


Housing PA6 GF30 
Contacts CuSn8+Ni+Au