22-04. THT

Products // Switches and Jacks // 22-04. THT THT-Toggle switch

  • 20000 switching cycles
  • sealed
  • max. 3 positions
  • up to 7 detent and two push button functions possible

Toggle switch in single pole design. For mechanical fixation on the PCB, there is, apart from the tongue and groove system, room for an additional plastic- or metal-fixation-peg, which can be soldered. The toggle-switch is a front-panel-component acc. DIN 41494 for 19'' racks in industrial electronics. This toggle switch is also available in SMT-design with virtually identical dimensions.

Mechanical Data

Fixation mode THT
Number of poles 1 pole
Number of switching positions 3 max.
Pitch 2.54mm
Mech. lifetime 20 000 operations
Electrical lifetime min. 10 000 actuations
Operating function detent pos/impulse pos.
Switching mode break before make
Operatiing torque ≤ 5Ncm
Stop strength >20Ncm
Vibration >20g
Shock test >50g
Resistance against cleaning fluids yes
Operating temperature -25...+95°C

Electrical Data

Switching voltage 60~/75-V
Contact load, dynamic 0,5A
Standby current (20°C) max. 2A
Contact rating max. 10VA
Test voltage 500V 50Hz
Contact resistance initial < 50mΩ
Insulation resistance >10 000MΩ
ESD protection 8kV

Material

Housing PA6.6 GF30
Contacts Au over Ni