Products // Slide switches // S...254 Slide switches

  • miniature slide switches with 3 pin connection
  • can be used as ON/OFF-switches or CHANGE-OVER-switches
  • end-stackable in 2.54 mm pitch
  • Solder and flux sealed base
  • gold plated roller contacts ensure safe switching even at low currents
  • robust and reliable switches despite of miniature size
  • high-end alternative to jumpers
  • can also be used as address switch for applications requiring a limited quantity of addresses

Despite their miniature size these switches are robust and reliable. Gold plated roller contacts guarantee secure switching even for low currents. There are multiple applications in industry as well as in consumer electronics. The switches are a High-End alternative to jumpers and also work as address switches for applications requiring a limited quantity of addresses.

Mechanical Data

Fixation mode THT
Pitch 2.54mm
Operating travel 1.6mm
Perm. ambient temperature -40...+85°C
Humidity 21 days at 95%RH (IEC 60068-2-3)
Soldering temperature max. 250°C/5s
Wave soldering base solder and flux sealed

Electrical Data

Operating voltage 12V
Contact load, dynamic 0,5A
Minimum voltage 10mV
Minimum load 1mA
Insulation resistance 10 000 MΩ min.bei 500VDC
Contact resistance 20mΩ max.
Dielectric strength between terminals 250 Veff, 50Hz
Dielectric strength between pins of stacked switches 2 000 Veff, 50Hz min
Electrical lifetime with nominal load 2000 cycles
Capacitance < 1.5pF


Housing PBT, glass filled (UL94-V0)
Actuator PBT, glass filled (UL94-V0)
Contacts Au over Ni