DH1 01

Products // Rotary code switches // DH1 01 Thumb wheel switch 10 positions

  • Thumb wheel switch for slim DIN-rail housings
  • Width 6 mm
  • Diameter 13mm
  • With or without operating crown
  • For right and left hand side PCBs
  • SMT- or J-Hook-pinning
  • lateral C-contact
  • More versions on request

Reflow solderable thumb wheel switch for mounting in slim housings. It is especially designed for adressing in BUS- and wireless-applikations in slim DIN-rail housings. The thumb wheel is permanently connected to the rotary code switch and it makes adjustments and legibility of the rotary code switch very easy.

Mechanical Data

Fixation mode SMT
Diameter without operating crown 13.00mm
Width 6.0mm
Pin connection 3+3
Perm. ambient temperature -50...+125°C
Perm. storage temperature -55...+135°C
Torque 1.2±0.2Ncm
Mech. lifetime 25 000 steps
Degree of protection comparable IP67
Humidity 21 days at 40°C, 93%RH
Reflow soldering 10s/260°C

Electrical Data

Operating voltage ≤ 42V
Contact load, static ≤ 0.4A
Contact load, dynamic ≤ 0.1A
Minimum load 1µA20mVDC
Test voltage 250V 50Hz/1min
Contact resistance < 80mΩ
Insulation resistance > 100MΩ